![Sig P320 [models with removable rear sight] optics ready plate | Aimpoint Acro](http://www.optics-spot.fi/cdn/shop/files/SigSauerLegion_M18_M19-AimpointAcro_2BME018.jpg?v=1747400309&width=1500)
![Sig P320 [models with removable rear sight] optics ready plate | Aimpoint Acro](http://www.optics-spot.fi/cdn/shop/files/SigSauerLegion_M18_M19-AimpointAcro_2BME018.jpg?v=1747400309&width=112)
![Sig P320 [models with removable rear sight] optics ready plate | Aimpoint Acro](http://www.optics-spot.fi/cdn/shop/files/SigSauerLegion_M18_M19-AimpointAcro_2BME018.jpg?v=1747400309&width=640)
Me and my wife both put these Night Fision Tritium sight on our CZ P-09 pistols.
And what a difference it is , these Tritium front sights make picking up your front sight post and acquiring a correct sight picture so much easier and faster.
Would highly recommend to anyone using iron sights.
![Olight Osight SE [red]](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Olight_Osight_SE.jpg?v=1753777925)
Von der Bestellung über den Versand bis hin zum Produkt lief alles perfekt! Dankeschön 🙏
Nickel, conforme à ma commande produit de qualité adaptabilité avec vortex red dot. Envoi rapide et très efficace. Thanks
Really great product and quick delivery.
Le rail en métal est qualitatif par sa masse, l'usinage excellent, l'ajustage est précis, les butées de fixations sont aux bons endroits. L'éjection des étuis est inchangée. J'ai utilisé un peu de graisse pour faire coulisser le rail à sa place. La fixation de ma lunette est parfaite. Que du plaisir, je recommande !
Everything works fine -
I had to use quite a bit of force to remove the old rear sight, but the mount fits perfectly.
Easy installation.
Comes with 3 bags of screws, 2 screws in each with different length.
![1911 [G.I. Cut] red dot mount | type S](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/1911_GI_Cut_red_dot_mount_Holosun_K-series_footprint_49423.jpg?v=1749237979)
Bonjour, suite à une erreur de ma part je tenais à m’à m’excuser suite à un commentaire négatif laissé auparavant.
Je n’avais pas fait attention. Le fournisseur a bien répondu à mon mail
Le fournisseur cherche une solution à mon problème
Donc je dois encore le remercier.
Cordialement, FABRICE
Thank you for feedback but from our email box I can see we exchanged back an forth altogether 4 emails, the last email went from us. We did not leave any of your questions unresponded.
Just perfect for the object, shiping and seller!
Produit conforme aux attentes, produit de qualité
![1911 [Novak Cut] red dot mount | Shield RMSc footprint](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/1911_Novak_Cut_red_dot_mount_with_Shield_RMSc_footprint.jpg?v=1756984262)
Good advice from the Optic-Spot support. I needed the Optic Plate For the Vortex Defender ST RedDot
Fits perfect for Walther Q5 SF Black Ribbon and Vortex Defender CCW
Embase très facile à monté ( mettre un peu de loctite bleu sur les vis ) résistante et de très bonne manufacture. Livraison rapide .
Fit up was perfect. Shipping was fast considering your location. Thank you for tapping the inside bag to shipping bag. At time of delivery bag was wide open. Fear of missing product was gone after inspection.
Produit conforme aux attentes, produit de qualité
![Ruger Mark 22/45 [Competition, Hunter & Target] adjustable sight set | with fiber optics type B](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Ruger_Mark_Competition_Hunter_Target_adjustable_sight_set_with_fiber_optics_type_B.jpg?v=1762604780)
This fit way too tight. Had to be pressed on to get it on and the pressure required distorted the rear set screw hole making the rear set screw useless….. don’t buy find a different maker
great service, fast shipping. good quality of part! recommend!
![Walther PDP 2.0 [2022] plate | Vortex Venom footprint](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Walther_PDP_2.0_OR_plate_for_Vortex_Venom_footprint.webp?v=1747403850)
Looks like this optics mounting plate checks all of the boxes, fits a Beretta GTS full size and will allow you to mount a Trijicon SRO perfectly, almost. Everything fits as the compatibility chart says, except that when mounted, the front 1/4”-3/8” of the SRO overhangs the ejection port of the slide. Spent shells would bang the bottom of the SRO, total waste of time, ordering and trying to return it and get a credit.
Plate is perfect.
Easy to use and locks well!
It is ok.
Fast delivery.
![Springfield [XD,XDM] & HS Produkt [XDM, HS-9, SF19] red dot mount | Shield RMSc footprint](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/SpringfieldXD-XDM-XDS_HSProduktHS-9_SF19_Slinereddotmountshieldrmscfootprint.jpg?v=1747400458)
