![IWI Jericho 941 punapisteteline [11.6 mm] | Trijicon RMR -jalanjälki](http://www.optics-spot.fi/cdn/shop/files/Jericho_941_new_low_LPA_red_dot_mount_Trijicon_RMR_footprint_49501.jpg?v=1749299840&width=1500)
![IWI Jericho 941 red dot mount [11.6 mm] | Trijicon RMR footprint](http://www.optics-spot.fi/cdn/shop/files/IWI_Jericho_mount_compatibility_low.jpg?v=1764913820&width=1500)
Everything works fine -
I had to use quite a bit of force to remove the old rear sight, but the mount fits perfectly.
Easy installation.
Comes with 3 bags of screws, 2 screws in each with different length.
![1911 [G.I. Cut] red dot mount | type S](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/1911_GI_Cut_red_dot_mount_Holosun_K-series_footprint_49423.jpg?v=1749237979)
Bonjour, suite à une erreur de ma part je tenais à m’à m’excuser suite à un commentaire négatif laissé auparavant.
Je n’avais pas fait attention. Le fournisseur a bien répondu à mon mail
Le fournisseur cherche une solution à mon problème
Donc je dois encore le remercier.
Cordialement, FABRICE
Thank you for feedback but from our email box I can see we exchanged back an forth altogether 4 emails, the last email went from us. We did not leave any of your questions unresponded.
Just perfect for the object, shiping and seller!
Produit conforme aux attentes, produit de qualité
![Olight Osight SE [red]](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Olight_Osight_SE.jpg?v=1753777925)
![1911 [Novak Cut] red dot mount | Shield RMSc footprint](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/1911_Novak_Cut_red_dot_mount_with_Shield_RMSc_footprint.jpg?v=1756984262)
Good advice from the Optic-Spot support. I needed the Optic Plate For the Vortex Defender ST RedDot
Fits perfect for Walther Q5 SF Black Ribbon and Vortex Defender CCW
Embase très facile à monté ( mettre un peu de loctite bleu sur les vis ) résistante et de très bonne manufacture. Livraison rapide .
Fit up was perfect. Shipping was fast considering your location. Thank you for tapping the inside bag to shipping bag. At time of delivery bag was wide open. Fear of missing product was gone after inspection.
Produit conforme aux attentes, produit de qualité
![Ruger Mark 22/45 [Competition, Hunter & Target] adjustable sight set | with fiber optics type B](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Ruger_Mark_Competition_Hunter_Target_adjustable_sight_set_with_fiber_optics_type_B.jpg?v=1762604780)
great service, fast shipping. good quality of part! recommend!
![Walther PDP 2.0 [2022] plate | Vortex Venom footprint](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Walther_PDP_2.0_OR_plate_for_Vortex_Venom_footprint.webp?v=1747403850)
Looks like this optics mounting plate checks all of the boxes, fits a Beretta GTS full size and will allow you to mount a Trijicon SRO perfectly, almost. Everything fits as the compatibility chart says, except that when mounted, the front 1/4”-3/8” of the SRO overhangs the ejection port of the slide. Spent shells would bang the bottom of the SRO, total waste of time, ordering and trying to return it and get a credit.
Plate is perfect.
Easy to use and locks well!
It is ok.
Fast delivery.
![Springfield [XD,XDM] & HS Produkt [XDM, HS-9, SF19] red dot mount | Shield RMSc footprint](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/SpringfieldXD-XDM-XDS_HSProduktHS-9_SF19_Slinereddotmountshieldrmscfootprint.jpg?v=1747400458)
Perfect fit and great customer support. Shipping was fast.
Cette plaque d'adaptation ne présente aucun problème de montage, mais son prix est trop élevé (presque 60 € !)
![Walther PDP 2.0 [2022] plate | Shield RMSc footprint](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Walther_PDP_2.0_optics_ready_plate_for_Shield_RMSc_footprint.webp?v=1750486873)
The plate fit very well on my APX A1 and installation instructions were clear
Perfetta per defender ccw vortex.
Ottimo anche optics spot....grandi
![Walther PDP 2.0 [2022] plate | Shield RMSc footprint](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/WaltherPDPv.2022_2.0_-ShieldRMSc_2BME030.jpg?v=1747400596)
Perfect compatibility with my CZ SHADOW 2 COMP and HS507C. Easy to install.
Delivery to sweden took just a few days.
+ Screws included.
+ fast delivery
Fit the gun perfectly. It’s solidly built, made for heavy use and plenty of extra screws for no additional cost. Was shipped promptly and got to me within a week after ordering it…
![Walther PDP 2.0 [2022] plate | Trijicon RMR footprint](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Walther_PDP_2.0_optics_ready_plate_for_Trijicon_RMR_footprint.webp?v=1750486965)
