Red dot mounts for Beretta 1301 Competition Pro

Mount styles for the 1301 Competition Pro

Choose between low-profile plates that keep the dot close to the bore and rigid one-piece bases that maximize stability. Each option is sized for the 1301 Competition Pro for a precise fit and repeatable zero after cleaning or transport.

Supported red-dot footprints

Pick a mount that matches your optic’s footprint. Popular choices include:

Trijicon RMR / SRO

Leupold DeltaPoint Pro

Shield RMSc

Holosun K-Series

Vortex Venom / Docter

Aimpoint Acro

C-More RTS

Benefits at the buzzer

On the clock, a red dot helps you see more and confirm hits faster. The right mount delivers:

Both-eyes-open indexing for rapid arrays and transitions

Consistent point of impact on slugs and tighter shot control

Reversible, drop-in installation—no permanent mods required

Broad compatibility with proven competition-grade optics

Give your Beretta 1301 Competition Pro a confident, match-ready sighting solution—bolt on a dedicated red dot mount and keep your focus on speed and accuracy.

Chameleon G-SRS8 will fit to berreta92x RDO

ChameleonG-SRS8 will fit to berreta92x RDO

Beretta 92X, 92X RDO, M9A4 Optics Ready plate universal | type A

Super

It should always be like that

CZ Shadow 2 Optics Ready plate | Leupold Delta Point Pro

Perfect

Absolutely excellent quality

KMR W-02 & L-02 Optics Ready plate | Shield RMSc footprint

Brno ZKM 452 picatinny rail [11mm]

👍

Osight C

Good red dot

Sig mount

1st class service all round.

Sig P220, P225, P226, P227, P229, P320 red dot mount universal | type C

Top

Die Platte passt perfekt. Bei der Abwicklung des Kaufes und bei der Lieferung hat alles super funktioniert. Vielen Dank

Walther PDP 2.0 [2022] plate | Shield RMSc footprint

Use Night Fision- cheaper/ better/ reliable

I spent A LOT of time researching the Nocturne- C and my new Shadow 2 carry so I can help the community learn. As you can see here, even most STAFF don’t know or care enough to say so… go to Night Fision and use the “p-series” (pictured below). Its time we start punishing these companies for not knowing their own products, sharing the information we have with each other, and finding a dealer that offers the best quality and price to us the FIRST time. Do NOT use this company or give them your money.

CZ P-09 NOCTURNE night sights with tritium | type A

To clarify the situation - you asked us 2 days ago 'whether the p-09 nocturne sights will work on shadow 2 carry'.
We responded that they will not work.

You wrote back in similar manner as here (that is - very pasionately) that we advised wrongly.

But we did not advise wrongly. Why? Because although the sights are the same dovetail cut, they are different heights. So if you install Nocturne or Sig P320 sights on Shadow 2 Carry, they will technically fit, but on shooting range you will soon discover that you shoot higher than you are supposed to, when using such sights. The reason is that Carry has front sight 0.5mm lower.

In short - we advised you correctly because we were dealing with this question already too many times and knew the answer. Else we would not advise.

We are amazed that you decided to write us bad review because of our advise, but that is up to you.

Wish you well and if any further compatibility question, just let us know.

Super

CZ 75B, CZ P01, CZ 75 SP-01 red dot mount | Shield RMSc footprint

Thank you!

Didn't arrive due to import issues with UPS, no response from company

My order was not fulfilled and you have failed to respond to my inquiry. I expect a refund asap. Thanks

1911 [Novak Cut] red dot mount | Shield RMSc footprint

Hello,
I checked your order and it was dispatched the same day as ordered. It appears UPS was trying to contact for your import procedures but unsucessfully so it was not delivered. Also I could not have found any email from you regarding the shipment. Please write us at info@optics-spot.com and we will resolve

Good choice

Very good product, recommend

Thank you!

I am satisfied with the purchase

Ruger Mark 22/45 [Lite & Tactical] adjustable sight set | with fiber optics type B

Thank you!

Good!

Thank you!

Vortex Defender CCW

Thank you!

Perfect

Solid, fits perfect.
I use Vector Optics Frenzy-X 1x24x29 GenII 6MOA Red Dot (SCRD-76) on my CZ Shadow 2 OR
Its perfect.

CZ Shadow 2 Optics Ready plate | Trijicon RMR footprint

Thank you!

CZ TS 2 red dot mount universal | type B

Thank you!

CZ P-10 Optics Ready plate | Shield RMSc & Holosun K-series footprint

Thank you!

Everything is perfect

It fits well with Canik Mete SFX Pro and Primary arms Red dot.

Canik METE & TTI optics ready plate universal | type C

Thank you!

Sig P320 X5 Legion, M17, M18 plate | Trijicon RMR footprint

Thank you!

Tanfoglio red dot mount universal | type C

Thank you!

Good quality

Excellent product, highly recommended.

Thank you!

Perfect !

Very good mount. Fits perfectly a Trijicon RMR red dot and a picatiny rail, without any play at all, the provided screws are of good quality. Just a perfect item at a very reasonnable price :-)