Rautähtäimet Beretta PX4 Stormille

Miksi päivittää Beretta PX4 Stormin rautähtäimet?

Tehdasrautatähtäinten vaihtaminen tarkkuusparannuksiin voi merkittävästi parantaa PX4:n ampumaominaisuuksia. Odota etuja kuten:

Nopeampi maalin haku ja sujuvammat jatkolaukaukset

Parempi näkyvyys kaikissa valaistusolosuhteissa

Kestävä rakenne todellista käyttöä varten

Parempi hallinta EDC-, itsepuolustus- tai ratavuoroilla

Päivitetyt rautähtäimet nostavat PX4:si entistä suorituskykyisemmäksi ja itsevarmuutta tuovaksi sivuaseeksi.

Punapistetähtäimen kiinnitysratkaisut Beretta PX4 Stormille

Haluatko käyttää punapistetähtäintä? Vaikka PX4 Storm ei ole tehdasasenteisesti Optics Ready, tarjoamme dovetail-pohjaisia punapistetähtäinkiinnikkeitä, jotka eivät vaadi luistin muokkausta.

Tutustu koko valikoimaamme PX4 Stormin punapistetähtäinkiinnitysratkaisuista täällä: Beretta PX4 Storm punapistetähtäinkiinnikkeet.

Fits perfectly without the gasket that you’re supposed to use with it.

First thing the plate fit perfectly, but the one I added the gasket and then the optic not one single screw would screw in. So I tried and tried for quite some time took a break came back put the optic on without the gasket put a screw in, turned it and it bit down, which I was amazed, so I kept screwing and went all the way in took the other screw put it all the way in and I had a winner! So one by one I took the two screws out blue Loctite and snuggled back down. Shake awake optic from Amazon works perfectly.

Beretta [APX A1 & APX RDO] Optics Ready plate | Trijicon RMR footprint

Alles top gerne wieder

Walther [PPQ, P99, Creed, PPX & PPS] red dot mount | Trijicon RMR footprint

Front peg adjustment

The front pegs were too large of diameter and I had to machine them down to the proper size.

Taurus [G3, G2S, G2C, TX22] red dot mount [20.5 mm] | Trijicon RMR footprint

Great optic mount

The Toni Systems mount fit perfectly to my Beretta 92XI Gara. There was a snag with FedEx shipping but the service people at Optics Spot were very helpful in resolving the snag.

Beretta [92X, 92XI, 92 GTS, 92X RDO, M9A4] Optics Ready plate | type B [RMR & RTS footprint]

Great tool

Perfect

The ONLY Place to Shop

Optics Spot was the ONLY website that offered both front and rear fiber optic sights for my Beretta M9A3

Beretta [92A1, 92X, 92XI, 98A1, M9A3 & other] adjustable sights | with fiber optics

Hard to mount on 1911 22lr

The osight came with a lot of hardware to use but none of them worked. Had to go to the shop to get the right length screws.

1911 .22 LR [GSG Cut] red dot mount | Shield RMSc footprint

MOS adapter plate

Excellent fit and workmanship

Red dot mount Glock models [G17, G19, G26 & other] | Shield RMSc footprint

Adaptateur pr

Très bon matériel. Adapté pour le canik mété sf

Canik METE Optics Ready plate | type C [RMR, Docter, RTS footprint]

Bien mais fragile !!!!

ATTENTION À LA VIS DE RÉGLAGE EN ÉLÉVATION !!!!
Je ne doute pas de la qualité SHIELD et Ce n'est pas mon premier point rouge et la finesse de réglage ne m'avait jamais posé problème. La, la vis pour l'élévation semblait tourner dans le vide après plusieurs réglages sur différentes armes. Puis, plus de mouvement du point !! Pas de point dur ressenti me faisant penser que j'ai "forcé" comme une brute🐂, 500€ par la fenetre😭

M3x8 are for MOS cover, M3x6 for MOS red dot plate (Gen 5 Glocks)

Those are for the MOS cover plate. For MOS red dot plates use TX10 M3x6 steel (at least 10.9 or higher quality).

Screws for Glock MOS red dot plates | 2pcs

Parfait

Parfait pour un HK USP custom et Vortex defender.. tiré 200 cartouches , pour l'instant tout va bien 👍

HK USP & USP Tactical red dot mount universal | type S [RMSc, DPP, K-series footprint]

So far so good had it installed today need a little fine tuning but it fit thank you.

1911 [BoMar Cut] adjustable rear sight | with white dots

Works fantastic!

Easy to set the right torque and works pretty accurately!
Great tool to mount red dots etc.

Płytka montażowa

Rewelacja, wszystko pasuje idealnie, a do tego tańszą niż na rynku krajowym

CZ Shadow 2 Optics Ready plate | Shield RMSc & Holosun K-series footprint

Geen levering

Ik heb dit plaatje besteld bij jullie, maar nooit gekregen. Er moest afgetekend worden voor dit item, maar is nergens terug te vinden, en ik heb zeker geen handtekening gezet. UPS niet te bereiken, ik zou graag een bewijs van levering zien

Walther PDP 2.0 [2022] Optics Ready plate | Shield RMSc footprint

très fragile!

très fragile, cassé en essayant de le mettre en lieu et place

Springfield [XD,XDM] & HS Produkt [XDM, HS-9, SF19] adjustable sights | with fiber optics

Sig p320 x full

The red dot is so high up, you can't see the sights, even with a high sight.

Sig P320 Optics Ready plate | type C [RMR, RTS & Docter footprint]

Perfect fit with my red dot Frenzy!!

Many thanks to French support team for valuable advise

Beretta [APX A1 & APX RDO] Optics Ready plate | Docter footprint

Great optic!

Mounted on a G48 MOS. No adapter plate needed and fits perfectly. Co witness with stock GLOCK sights is also really good.

The greed 6 MOA dot is super crisp - even on higher brightness settings.
I also love the size of the larger green dot, since it’s easy to pick up on fast draws.
Overall it really fits my carry gun nicely!

Very easy to install and use !

I bought it last week and I received in 2 days
It was very easy to install with the G30 mount, it tooks me 10 min !
Thanks Paul for your answers

Great sight picture

Me and my wife both put these Night Fision Tritium sight on our CZ P-09 pistols.
And what a difference it is , these Tritium front sights make picking up your front sight post and acquiring a correct sight picture so much easier and faster.
Would highly recommend to anyone using iron sights.