Shield RMSc footprint -standardi
Mitkä punapistetähtäimet voit asentaa kiinnikkeeseen, jossa on RMSc- tai Shield RMSc footprint? Voitko asentaa Sig Sauer Romeo Zero -tähtäimen samalle levylle kuin Shield RMSc? Käsittelemme tässä artikkelissa Shield RMSc footprintin täyden yhteensopivuuden.
Mitä "footprint" tarkoittaa? Termi footprint viittaa optisen laitteen pohjassa olevien kiinnityspisteiden ja ruuvinreikien rakenteeseen.
Ja mitä tarkoittaa, jos footprintit ovat yhteensopivia?
Jokaisessa optisessa tähtäimessä on jonkinlainen kiinnityspohja. Pohja koostuu eri kohdissa olevista tapeista ja ruuvien rei'istä, joita käytetään tähtäimen kiinnittämiseen kiinnikkeisiin. Jos mitkä tahansa kaksi tähtäintä käyttävät samaa kiinnityspohjaa, sanomme, että niillä on sama footprint.
Tässä artikkelissa näytämme, mitkä punapistetähtäimet käyttävät samaa footprintia.
Shield RMSc footprint koostuu neljästä kolosta tähtäimen kulmissa ja kahdesta ruuvinreiästä tähtäimen takaosassa.
Etu- sekä takakolojen välinen etäisyys on 17 mm / 0.66 tuumaa. Takakoloista etukoloihin etäisyys on 32,8 mm / 1.29 tuumaa. Näiden neljän kolon sijainti vastaa tappien sijaintia minkä tahansa tämän standardin mukaisen kiinnikkeen kiinnityspinnassa.
Ruuvinreiät sijaitsevat optisen laitteen takaosassa. Niitä käytetään tähtäimen kiinnittämiseen kiinnikkeisiin. Näiden kahden ruuvinreiän välinen etäisyys on 14 mm / 0.55 tuumaa.
Näihin ruuvinreikiin käytettävät ruuvit sisältyvät aina tähtäimen pakkaukseen.
RMSc-footprint on käytössä myös monilla muilla markkinoilla olevilla valmistajilla.
Alta löydät täydellisen luettelon punapistetähtäimistä, jotka toimivat Shield RMSc footprintin kanssa.
Shield RMSc standard
ADE Advanced Optics
Burris
JPoint
Canik
Osight
Riton
Shield
Sig
Sightmark
Swampfox
UTG
Vector Optics
Vortex
Vector Optics Frenzy-S 1x17x24 MOS Multi Reticle punapistetähtäin
Sightmark Mini Shot A-Spec M3 Micro Reflex Sight punapistetähtäin
Se riippuu siitä, mihin laitteeseen haluat asentaa sen.
Punapistetähtäimille on monia erilaisia kiinnityspohjia, mutta muut yleisimmät ovat seuraavat:
Plate worked great so far. You’ll probably need an angled shim to zero in your red dot. Seems to be common with CZ.
This mounts is as described. Came with all the screws needed to mount on the slide and to mount the optic. Took about 2 weeks to get to me after submitting the order. Was shipped from the Netherlands. There were no additional fees ( tariff, customs or tax) up arrival.
Did not realize “in stock” meant in stock in Europe, but delivery was fine and great fit on bun.
I've had some adapter plates for my other pistols, but this one was a direct Glock MOS to Holosun mount and very low profile. It fit tight but perfectly and the machining is clean. Very pleased with this purchase.
Was a little concerned when I saw it going through customs but it is exactly what I wanted and needed. Wasn’t able to find it anywhere else so I was relieved when this arrived.
I tried to get information about this product from other suppliers but no one could give me a definite response, these guys were awesome and very professional.
The product was exactly what was discussed and fit.
Will definitely purchase from here again.
Optic plate install was a precision fit. There were no problems installing the optic plate onto my KMR-L-02 ORCA OR. Awesome pistol now with tge optic plate installed with my C-More RTS3B 2V red dot.
Excellent for my Glock 19 Gen5/Vortex Defender XL. Had some help to fit so straightforward enough. Highly recommend.
Ho seguito le istruzioni ma l'accensione e spegnimento in automatico non funziona. quando c'è da premere contemporaneamente x spegnere il Red dot faccio fatica
The part fits the beretta nicely
Still had to order screws at the cost of $6 apiece because for some reason unbeknownst to any living human being they don’t send the right screws an of course they are some odd size that nobody even has
Wasn’t impressed with how long it took to get here from Czech Republic
Didn’t no when I ordered
Perfecte beschrijving van montage plaat. Het is makkelijk te monteren.zeer snel verzonden. Dank aan het hele team!
Bei der Montage hat mit ein Vereinskamerad geholfen und auch den Holosun mit montiertes hat gepasst :-)
Good quality product, also clear detailed website which is important to choose the right plates.
I had some questions about the delivery and I got immediately feedback so good customer service !
Like ronseal "does exactly what it says on the tin". Perfect fit to a B14 Wilderness no complaints
Der Magnifier tut was er soll. Der Augenabstand zur Linse erfordert jedoch etwas Übung wenn man den ganzen Linsenumfang sehen möchte.
Consistent with Phoenix craftsmanship and precision machining, their optic ready plate is an essential component for maximizing the performance of the Drake.
Optics Spot was great in providing in stock notification as opposed to the lackluster service from B&T USA.
In addition, Optics Spot gave real time pertinent information on tracking and delivery.
Plate worked great so far. You’ll probably need an angled shim to zero in your red dot. Seems to be common with CZ.
This mounts is as described. Came with all the screws needed to mount on the slide and to mount the optic. Took about 2 weeks to get to me after submitting the order. Was shipped from the Netherlands. There were no additional fees ( tariff, customs or tax) up arrival.
Did not realize “in stock” meant in stock in Europe, but delivery was fine and great fit on bun.
Great quality perfect fit


